Animal repeller with multiple alarm modes

 Effective against birds, cats and dogs.

The animal repeller can be operated either by the included power supply or 4 x 1.5 volt mono-batteries. This way it is possible to use it nearly everywhere: it can be placed in the entrance area as well as in the rest of the garden, like the flowerbed or sandbox.

As soon as the passive infrared sensor detects a movement inside the supervised area (ca. 10 metres of reach, 120° angle), the animal repeller will act the way you want: it will either send sound waves in various frequency ranges from 16 to 27 kHz or a loud alarm - both together is also possible.

It is also possible to turn on an additional slow clocked strobe effect (repeating photoflash), which is highly effective against birds and other nocturnal animals - especially effective at night or in shady areas, e.g. under trees and hedges. So 6 different operation modes are possible.

A further operating mode is the continuous strobe-mode: in this mode the infrared sensor, the ultrasound and the alarm are turned off and the light of the animal repeller will flash continuously. Because of the increased energy demand it is recommended to operate the animal repeller via the included mains adapter.

To gain access to the battery case, the connection for the power supply and the different setting options, just pull the clamped cover on the backside off.

Major features:
• Easy operating
• LED condition control
• Ultrasound, alarm and/or strobe
• Versatile capabilities
• Mains operation or with batteries

Technical specifications:
• Up to 10 metres of reach
• Angle of supervision: ca. 120°
• Frequency range: ca. 16 - 27 kHz (random)
• Dimensions: 20,5 x 21 x 11 cm
• Weight: ca. 660 g without batteries
• Power supply by mains operation or 4 x 1.5 volt mono-batteries